Additional photos: picture 1, picture 2, picture 3, picture 4, picture 5, picture 6, picture 7, picture 8, picture 9, picture 10
Drilling, Solids Control, Construction, Mining, Irrigation
AgriEquip.com
May 23rd, 2008 at 9:26 am
Grove Crane
May 22nd, 2008 at 10:12 am
Carbides
- We offer most types and sizes.
- Multi-Dome
- Ovoid
- Wing Tip
- Single Conical
- Double Conical
- Parabolic
Additional photos: picture 1, picture 2, picture 3, picture 4, picture 5, picture 6
May 21st, 2008 at 2:22 pm
Drill Bits
We offer numerous types of drill hammer bits, including:
- CC Krusher
- Flat Face
- Concave
- Drop-Center
- Convex
We can accommodate most standard shank sizes.
May 21st, 2008 at 1:49 pm
Pumps
- Hydraulically driven
- Water & mud
- Speed & flow control
- Pressure gauge
- Pressure relief valve
- Many types and brands available
We carry pumps for grouting, water-based or foam-based coring, mud rotary drilling, and many other purposes. Whether your project requires low volume, high pressure piston pumps or centrifugal top-feed mud pumps or nearly any other type, we can fulfill your needs.
May 21st, 2008 at 1:34 pm
Pipe
Call for details.
May 21st, 2008 at 1:22 pm
IR-XHP1170 WCAT Compressor
- Caterpiller C-15
- 6 Cylinders
- 5.4 in cylinder bore
- 6.5 in cylinder stroke
- 893 cu in displacement
- 1800 rpm
- 1350 idle rpm
- 525 BHP speed
Details: Diesel fuel, water cooling, 24 electrical volts, 2 x 1400 CCA, 16 gal radiant cooling capacity, 16000 ft altitude capability, 75% load:21.1gpm, 100% load:23gpm, rotary screw compressor, free-air delivery 1170cfm, rated operating press 350psig, air discharge outlet size 3in, air discharge outlet quantity 1, separator tank volumes 92gal, oil capacity 62gal, dims with tandem running gear:24ft 2in length, 7ft 5in wide, 8ft 4in height, 17250 lbs
May 21st, 2008 at 1:04 pm
Numa Patriot 80 Hammer
- Down Hole Hammer
- Simplified hammer design with less internal components.
- Drills at high frequency to provide less vibration
- Operates at pressures to 350PSI (23.8 BAR)
- Drills effeciently against high heads of water
- 7-1/8in diameter (181mm)
- 6in bore (152mm)
- 3-3/4in stroke (95mm)
May 21st, 2008 at 12:45 pm
Cement Truck
May 21st, 2008 at 11:32 am
Other Equipment Available
We also offer a broad selection of equipment in the following categories:
- Generators
- Casing
- Tubing
- Plastics
- Motors
Contact us for details.
May 17th, 2008 at 10:10 am
Cement Mixer
Recent Additions
Categories
Archives